系统版本osx10.10.2 (14C109)
apache2配置文件httpd.conf如下
<code>## This is the main Apache HTTP server configuration file. It contains the# configuration directives that give the server its instructions.# See for detailed information.# In particular, see # # for a discussion of each configuration directive.## Do NOT simply read the instructions in here without understanding# what they do. They're here only as hints or reminders. If you are unsure# consult the online docs. You have been warned. ## Configuration and logfile names: If the filenames you specify for many# of the server's control files begin with "/" (or "drive:/" for Win32), the# server will use that explicit path. If the filenames do *not* begin# with "/", the value of ServerRoot is prepended -- so "logs/access_log"# with ServerRoot set to "/usr/local/apache2" will be interpreted by the# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log" # will be interpreted as '/logs/access_log'.## ServerRoot: The top of the directory tree under which the server's# configuration, error, and log files are kept.## Do not add a slash at the end of the directory path. If you point# ServerRoot at a non-local disk, be sure to specify a local disk on the# Mutex directive, if file-based mutexes are used. If you wish to share the# same ServerRoot for multiple httpd daemons, you will need to change at# least PidFile.#ServerRoot "/usr"## Mutex: Allows you to set the mutex mechanism and mutex file directory# for individual mutexes, or change the global defaults## Uncomment and change the directory if mutexes are file-based and the default# mutex file directory is not on a local disk or is not appropriate for some# other reason.## Mutex default:/private/var/run## Listen: Allows you to bind Apache to specific IP addresses and/or# ports, instead of the default. See also the # directive.## Change this to Listen on specific IP addresses as shown below to # prevent Apache from glomming onto all bound IP addresses.##Listen 12.34.56.78:80Listen 80## Dynamic Shared Object (DSO) Support## To be able to use the functionality of a module which was built as a DSO you# have to place corresponding `LoadModule' lines at this location so the# directives contained in it are actually available _before_ they are used.# Statically compiled modules (those listed by `httpd -l') do not need# to be loaded here.## Example:# LoadModule foo_module modules/mod_foo.so#LoadModule authn_file_module libexec/apache2/mod_authn_file.so#LoadModule authn_dbm_module libexec/apache2/mod_authn_dbm.so#LoadModule authn_anon_module libexec/apache2/mod_authn_anon.so#LoadModule authn_dbd_module libexec/apache2/mod_authn_dbd.so#LoadModule authn_socache_module libexec/apache2/mod_authn_socache.soLoadModule authn_core_module libexec/apache2/mod_authn_core.soLoadModule authz_host_module libexec/apache2/mod_authz_host.soLoadModule authz_groupfile_module libexec/apache2/mod_authz_groupfile.soLoadModule authz_user_module libexec/apache2/mod_authz_user.so#LoadModule authz_dbm_module libexec/apache2/mod_authz_dbm.so#LoadModule authz_owner_module libexec/apache2/mod_authz_owner.so#LoadModule authz_dbd_module libexec/apache2/mod_authz_dbd.soLoadModule authz_core_module libexec/apache2/mod_authz_core.so#LoadModule authnz_ldap_module libexec/apache2/mod_authnz_ldap.soLoadModule access_compat_module libexec/apache2/mod_access_compat.soLoadModule auth_basic_module libexec/apache2/mod_auth_basic.so#LoadModule auth_form_module libexec/apache2/mod_auth_form.so#LoadModule auth_digest_module libexec/apache2/mod_auth_digest.so#LoadModule allowmethods_module libexec/apache2/mod_allowmethods.so#LoadModule file_cache_module libexec/apache2/mod_file_cache.so#LoadModule cache_module libexec/apache2/mod_cache.so#LoadModule cache_disk_module libexec/apache2/mod_cache_disk.so#LoadModule cache_socache_module libexec/apache2/mod_cache_socache.so#LoadModule socache_shmcb_module libexec/apache2/mod_socache_shmcb.so#LoadModule socache_dbm_module libexec/apache2/mod_socache_dbm.so#LoadModule socache_memcache_module libexec/apache2/mod_socache_memcache.so#LoadModule watchdog_module libexec/apache2/mod_watchdog.so#LoadModule macro_module libexec/apache2/mod_macro.so#LoadModule dbd_module libexec/apache2/mod_dbd.so#LoadModule dumpio_module libexec/apache2/mod_dumpio.so#LoadModule echo_module libexec/apache2/mod_echo.so#LoadModule buffer_module libexec/apache2/mod_buffer.so#LoadModule data_module libexec/apache2/mod_data.so#LoadModule ratelimit_module libexec/apache2/mod_ratelimit.soLoadModule reqtimeout_module libexec/apache2/mod_reqtimeout.so#LoadModule ext_filter_module libexec/apache2/mod_ext_filter.so#LoadModule request_module libexec/apache2/mod_request.so#LoadModule include_module libexec/apache2/mod_include.soLoadModule filter_module libexec/apache2/mod_filter.so#LoadModule reflector_module libexec/apache2/mod_reflector.so#LoadModule substitute_module libexec/apache2/mod_substitute.so#LoadModule sed_module libexec/apache2/mod_sed.so#LoadModule charset_lite_module libexec/apache2/mod_charset_lite.so#LoadModule deflate_module libexec/apache2/mod_deflate.so#LoadModule xml2enc_module libexec/apache2/mod_xml2enc.so#LoadModule proxy_html_module libexec/apache2/mod_proxy_html.soLoadModule mime_module libexec/apache2/mod_mime.so#LoadModule ldap_module libexec/apache2/mod_ldap.soLoadModule log_config_module libexec/apache2/mod_log_config.so#LoadModule log_debug_module libexec/apache2/mod_log_debug.so#LoadModule log_forensic_module libexec/apache2/mod_log_forensic.so#LoadModule logio_module libexec/apache2/mod_logio.soLoadModule env_module libexec/apache2/mod_env.so#LoadModule mime_magic_module libexec/apache2/mod_mime_magic.so#LoadModule expires_module libexec/apache2/mod_expires.soLoadModule headers_module libexec/apache2/mod_headers.so#LoadModule usertrack_module libexec/apache2/mod_usertrack.so##LoadModule unique_id_module libexec/apache2/mod_unique_id.soLoadModule setenvif_module libexec/apache2/mod_setenvif.soLoadModule version_module libexec/apache2/mod_version.so#LoadModule remoteip_module libexec/apache2/mod_remoteip.soLoadModule proxy_module libexec/apache2/mod_proxy.soLoadModule proxy_connect_module libexec/apache2/mod_proxy_connect.soLoadModule proxy_ftp_module libexec/apache2/mod_proxy_ftp.soLoadModule proxy_http_module libexec/apache2/mod_proxy_http.soLoadModule proxy_fcgi_module libexec/apache2/mod_proxy_fcgi.soLoadModule proxy_scgi_module libexec/apache2/mod_proxy_scgi.so#LoadModule proxy_fdpass_module libexec/apache2/mod_proxy_fdpass.soLoadModule proxy_wstunnel_module libexec/apache2/mod_proxy_wstunnel.soLoadModule proxy_ajp_module libexec/apache2/mod_proxy_ajp.soLoadModule proxy_balancer_module libexec/apache2/mod_proxy_balancer.soLoadModule proxy_express_module libexec/apache2/mod_proxy_express.so#LoadModule session_module libexec/apache2/mod_session.so#LoadModule session_cookie_module libexec/apache2/mod_session_cookie.so#LoadModule session_dbd_module libexec/apache2/mod_session_dbd.soLoadModule slotmem_shm_module libexec/apache2/mod_slotmem_shm.so#LoadModule slotmem_plain_module libexec/apache2/mod_slotmem_plain.so#LoadModule ssl_module libexec/apache2/mod_ssl.so#LoadModule dialup_module libexec/apache2/mod_dialup.soLoadModule lbmethod_byrequests_module libexec/apache2/mod_lbmethod_byrequests.soLoadModule lbmethod_bytraffic_module libexec/apache2/mod_lbmethod_bytraffic.soLoadModule lbmethod_bybusyness_module libexec/apache2/mod_lbmethod_bybusyness.so#LoadModule lbmethod_heartbeat_module libexec/apache2/mod_lbmethod_heartbeat.soLoadModule unixd_module libexec/apache2/mod_unixd.so#LoadModule heartbeat_module libexec/apache2/mod_heartbeat.so#LoadModule heartmonitor_module libexec/apache2/mod_heartmonitor.so#LoadModule dav_module libexec/apache2/mod_dav.soLoadModule status_module libexec/apache2/mod_status.soLoadModule autoindex_module libexec/apache2/mod_autoindex.so#LoadModule asis_module libexec/apache2/mod_asis.so#LoadModule info_module libexec/apache2/mod_info.so#LoadModule cgi_module libexec/apache2/mod_cgi.so#LoadModule dav_fs_module libexec/apache2/mod_dav_fs.so#LoadModule dav_lock_module libexec/apache2/mod_dav_lock.so#LoadModule vhost_alias_module libexec/apache2/mod_vhost_alias.soLoadModule negotiation_module libexec/apache2/mod_negotiation.soLoadModule dir_module libexec/apache2/mod_dir.so#LoadModule imagemap_module libexec/apache2/mod_imagemap.so#LoadModule actions_module libexec/apache2/mod_actions.so#LoadModule speling_module libexec/apache2/mod_speling.so#LoadModule userdir_module libexec/apache2/mod_userdir.soLoadModule alias_module libexec/apache2/mod_alias.soLoadModule rewrite_module libexec/apache2/mod_rewrite.soLoadModule php5_module libexec/apache2/libphp5.so#LoadModule hfs_apple_module libexec/apache2/mod_hfs_apple.so## If you wish httpd to run as a different user or group, you must run# httpd as root initially and it will switch. ## User/Group: The name (or #number) of the user/group to run httpd as.# It is usually good practice to create a dedicated user and group for# running httpd, as with most system services.#User _wwwGroup _www# 'Main' server configuration## The directives in this section set up the values used by the 'main'# server, which responds to any requests that aren't handled by a# definition. These values also provide defaults for# any containers you may define later in the file.## All of these directives may appear inside containers,# in which case these default settings will be overridden for the# virtual host being defined.### ServerAdmin: Your address, where problems with the server should be# e-mailed. This address appears on some server-generated pages, such# as error documents. e.g. [email protected]#ServerAdmin [email protected]## ServerName gives the name and port that the server uses to identify itself.# This can often be determined automatically, but we recommend you specify# it explicitly to prevent problems during startup.## If your host doesn't have a registered DNS name, enter its IP address here.##ServerName www.wdfxy.com:80## Deny access to the entirety of your server's filesystem. You must# explicitly permit access to web content directories in other # blocks below.# AllowOverride none Require all denied## Note that from this point forward you must specifically allow# particular features to be enabled - so if something's not working as# you might expect, make sure that you have specifically enabled it# below.### DocumentRoot: The directory out of which you will serve your# documents. By default, all requests are taken from this directory, but# symbolic links and aliases may be used to point to other locations.#DocumentRoot "/Library/WebServer/Documents" # # Possible values for the Options directive are "None", "All", # or any combination of: # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews # # Note that "MultiViews" must be named *explicitly* --- "Options All" # doesn't give it to you. # # The Options directive is both complicated and important. Please see # http://httpd.apache.org/docs/2.4/mod/core.html#options # for more information. # Options FollowSymLinks Multiviews MultiviewsMatch Any # # AllowOverride controls what directives may be placed in .htaccess files. # It can be "All", "None", or any combination of the keywords: # AllowOverride FileInfo AuthConfig Limit # AllowOverride None # # Controls who can get stuff from this server. # Require all granted## DirectoryIndex: sets the file that Apache will serve if a directory# is requested.# DirectoryIndex index.html index.php## The following lines prevent .htaccess and .htpasswd files from being # viewed by Web clients. # Require all denied## Apple specific filesystem protection.# Require all denied Require all denied## ErrorLog: The location of the error log file.# If you do not specify an ErrorLog directive within a # container, error messages relating to that virtual host will be# logged here. If you *do* define an error logfile for a # container, that host's errors will be logged there and not here.#ErrorLog "/private/var/log/apache2/error_log"## LogLevel: Control the number of messages logged to the error_log.# Possible values include: debug, info, notice, warn, error, crit,# alert, emer<i style="color:transparent">本￥文来源gaodai$ma#com搞$代*码*网(</i><strong>搞代gaodaima码</strong>g.#LogLevel warn # # The following directives define some format nicknames for use with # a CustomLog directive (see below). # LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common # You need to enable mod_logio.c to use %I and %O LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio # # The location and format of the access logfile (Common Logfile Format). # If you do not define any access logfiles within a # container, they will be logged here. Contrariwise, if you *do* # define per- access logfiles, transactions will be # logged therein and *not* in this file. # CustomLog "/private/var/log/apache2/access_log" common # # If you prefer a logfile with access, agent, and referer information # (Combined Logfile Format) you can use the following directive. # #CustomLog "/private/var/log/apache2/access_log" combined # # Redirect: Allows you to tell clients about documents that used to # exist in your server's namespace, but do not anymore. The client # will make a new request for the document at its new location. # Example: # Redirect permanent /foo http://www.example.com/bar # # Alias: Maps web paths into filesystem paths and is used to # access content that does not live under the DocumentRoot. # Example: # Alias /webpath /full/filesystem/path # # If you include a trailing / on /webpath then the server will # require it to be present in the URL. You will also likely # need to provide a section to allow access to # the filesystem path. # # ScriptAlias: This controls which directories contain server scripts. # ScriptAliases are essentially the same as Aliases, except that # documents in the target directory are treated as applications and # run by the server when requested rather than as documents sent to the # client. The same rules about trailing "/" apply to ScriptAlias # directives as to Alias. # ScriptAliasMatch ^/cgi-bin/((?!(?i:webobjects)).*$) "/Library/WebServer/CGI-Executables/$1" # # ScriptSock: On threaded servers, designate the path to the UNIX # socket used to communicate with the CGI daemon of mod_cgid. # #Scriptsock cgisock## "/Library/WebServer/CGI-Executables" should be changed to whatever your ScriptAliased# CGI directory exists, if you have that configured.# AllowOverride None Options None Require all granted # # TypesConfig points to the file containing the list of mappings from # filename extension to MIME-type. # TypesConfig /private/etc/apache2/mime.types # # AddType allows you to add to or override the MIME configuration # file specified in TypesConfig for specific file types. # #AddType application/x-gzip .tgz # # AddEncoding allows you to have certain browsers uncompress # information on the fly. Note: Not all browsers support this. # #AddEncoding x-compress .Z #AddEncoding x-gzip .gz .tgz # # If the AddEncoding directives above are commented-out, then you # probably should define those extensions to indicate media types: # AddType application/x-compress .Z AddType application/x-gzip .gz .tgz # # AddHandler allows you to map certain file extensions to "handlers": # actions unrelated to filetype. These can be either built into the server # or added with the Action directive (see below) # # To use CGI scripts outside of ScriptAliased directories: # (You will also need to add "ExecCGI" to the "Options" directive.) # #AddHandler cgi-script .cgi # For type maps (negotiated resources): #AddHandler type-map var # # Filters allow you to process content before it is sent to the client. # # To parse .shtml files for server-side includes (SSI): # (You will also need to add "Includes" to the "Options" directive.) # #AddType text/html .shtml #AddOutputFilter INCLUDES .shtml## The mod_mime_magic module allows the server to use various hints from the# contents of the file itself to determine its type. The MIMEMagicFile# directive tells the module where the hint definitions are located.##MIMEMagicFile /private/etc/apache2/magic## Customizable error responses come in three flavors:# 1) plain text 2) local redirects 3) external redirects## Some examples:#ErrorDocument 500 "The server made a boo boo."#ErrorDocument 404 /missing.html#ErrorDocument 404 "/cgi-bin/missing_handler.pl"#ErrorDocument 402 http://www.example.com/subscription_info.html### MaxRanges: Maximum number of Ranges in a request before# returning the entire resource, or one of the special# values 'default', 'none' or 'unlimited'.# Default setting is to accept 200 Ranges.#MaxRanges unlimited## EnableMMAP and EnableSendfile: On systems that support it, # memory-mapping or the sendfile syscall may be used to deliver# files. This usually improves server performance, but must# be turned off when serving from networked-mounted # filesystems or if support for these functions is otherwise# broken on your system.# Defaults: EnableMMAP On, EnableSendfile Off##EnableMMAP off#EnableSendfile onTraceEnable off# Supplemental configuration## The configuration files in the /private/etc/apache2/extra/ directory can be # included to add extra features or to modify the default configuration of # the server, or you may simply copy their contents here and change as # necessary.# Server-pool management (MPM specific)Include /private/etc/apache2/extra/httpd-mpm.conf# Multi-language error messages#Include /private/etc/apache2/extra/httpd-multilang-errordoc.conf# Fancy directory listingsInclude /private/etc/apache2/extra/httpd-autoindex.conf# Language settings#Include /private/etc/apache2/extra/httpd-languages.conf# User home directories#Include /private/etc/apache2/extra/httpd-userdir.conf# Real-time info on requests and configuration#Include /private/etc/apache2/extra/httpd-info.conf# Virtual hostsInclude /private/etc/apache2/extra/httpd-vhosts.conf# Local access to the Apache HTTP Server Manual#Include /private/etc/apache2/extra/httpd-manual.conf# Distributed authoring and versioning (WebDAV)#Include /private/etc/apache2/extra/httpd-dav.conf# Various default settings#Include /private/etc/apache2/extra/httpd-default.conf# Configure mod_proxy_html to understand HTML4/XHTML1Include /private/etc/apache2/extra/proxy-html.conf# Secure (SSL/TLS) connections#Include /private/etc/apache2/extra/httpd-ssl.conf## Note: The following must must be present to support# starting without SSL on platforms with no /dev/random equivalent# but a statically compiled-in mod_ssl.#SSLRandomSeed startup builtinSSLRandomSeed connect builtinInclude /private/etc/apache2/other/*.conf## uncomment out the below to deal with user agents that deliberately# violate open standards by misusing DNT (DNT *must* be a specific# end-user choice)###BrowserMatch "MSIE 10.0;" bad_DNT###RequestHeader unset DNT env=bad_DNT#</code>
搞代码网（gaodaima.com）提供的所有资源部分来自互联网，如果有侵犯您的版权或其他权益，请说明详细缘由并提供版权或权益证明然后发送到邮箱[email protected]，我们会在看到邮件的第一时间内为您处理，或直接联系QQ：872152909。本网站采用BY-NC-SA协议进行授权
转载请注明原文链接：mac 下 apache2.4.9 vhost设置请教
转载请注明原文链接：mac 下 apache2.4.9 vhost设置请教
