root@vzwc1:~# isainfo -namd64root@vzwc1:~# unameSunOSroot@vzwc1:~# cat /etc/release Oracle Solaris 11.1 X86 Copyright (c) 1983, 2012, Oracle and/or its affiliates. All rights reserved. Assembled 19 September 2012root@vzwc1:~# ifconfig -alo
root@vzwc1:~# isainfo -namd64root@vzwc1:~# unameSunOSroot@vzwc1:~# cat /etc/release Oracle Solaris 11.1 X86 Copyright (c) 1983, 2012, Oracle and/or its affiliates. All rights reserved. Assembled 19 September 2012root@vzwc1:~# ifconfig -alo0: flags=2001000849 mtu 8232 index 1 inet 127.0.0.1 netmask ff000000 net0: flags=1000843 mtu 1500 index 2 inet 192.168.1.61 netmask ffffff00 broadcast 192.168.1.255 ether 8:0:27:3c:8d:72 net1: flags=1000843 mtu 1500 index 3 inet 172.168.1.61 netmask ffffff00 broadcast 172.168.1.255 ether 8:0:27:16:13:40 lo0: flags=2002000849 mtu 8252 index 1 inet6 ::1/128 net0: flags=20002000840 mtu 1500 index 2 inet6 ::/0 ether 8:0:27:3c:8d:72 net1: flags=20002000840 mtu 1500 index 3 inet6 ::/0 ether 8:0:27:16:13:40 root@vzwc1:~# hostnamevzwc1
root@vzwc1:~# format Searching for disks...doneAVAILABLE DISK SELECTIONS: 0. c7t0d0 /pci@0,0/pci8086,2829@d/disk@0,0 1. c7t2d0 /pci@0,0/pci8086,2829@d/disk@2,0 2. c7t3d0 /pci@0,0/pci8086,2829@d/disk@3,0 3. c7t4d0 /pci@0,0/pci8086,2829@d/disk@4,0 4. c7t5d0 /pci@0,0/pci8086,2829@d/disk@5,0 5. c7t6d0 /pci@0,0/pci8086,2829@d/disk@6,0 6. c7t7d0 /pci@0,0/pci8086,2829@d/disk@7,0 7. c7t8d0 /pci@0,0/pci8086,2829@d/disk@8,0Specify disk (enter its number): 1selecting c7t2d0[disk formatted]No Solaris fdisk partition found.FORMAT MENU: disk - select a disk type - select (define) a disk type partition - select (define) a partition table current - describe the current disk format - format and analyze the disk fdisk - run the fdisk program repair - repair a defective sector label - write label to the disk analyze - surface analysis defect - defect list management backup - search for backup labels verify - read and display labels save - save new disk/partition definitions inquiry - show disk ID volname - set 8-character volume name ! - execute , then return quitformat> pWARNING - This disk may be in use by an application that has modified the fdisk table. Ensure that this disk is not currently in use before proceeding to use fdisk.format> fdisk No fdisk table exists. The default partition for the disk is: a 100% "SOLARIS System" partitionType "y" to accept the default partition, otherwise type "n" to edit the partition table.yformat> pPARTITION MENU: 0 - change `0' partition 1 - change `1' partition 2 - change `2' partition 3 - change `3' partition 4 - change `4' partition 5 - change `5' partition 6 - change `6' partition 7 - change `7' partition select - select a predefined table modify - modify a predefined partition table name - name the current table print - display the current table label - write partition map and label to<p>本文来源gao!%daima.com搞$代*!码$网9</p> the disk ! - execute , then return quitpartition> pCurrent partition table (default):Total disk cylinders available: 1533 + 2 (reserved cylinders)Part Tag Flag Cylinders Size Blocks 0 unassigned wm 0 0 (0/0/0) 0 1 unassigned wm 0 0 (0/0/0) 0 2 backup wu 0 - 1532 2.99GB (1533/0/0) 6279168 3 unassigned wm 0 0 (0/0/0) 0 4 unassigned wm 0 0 (0/0/0) 0 5 unassigned wm 0 0 (0/0/0) 0 6 unassigned wm 0 0 (0/0/0) 0 7 unassigned wm 0 0 (0/0/0) 0 8 boot wu 0 - 0 2.00MB (1/0/0) 4096 9 unassigned wm 0 0 (0/0/0) 0partition> 6Part Tag Flag Cylinders Size Blocks 6 unassigned wm 0 0 (0/0/0) 0Enter partition id tag[unassigned]: usrEnter partition permission flags[wm]: Enter new starting cyl[1]: 3Enter partition size[0b, 0c, 3e, 0.00mb, 0.00gb]: 2gpartition> labelReady to label disk, continue? yespartition> pCurrent partition table (unnamed):Total disk cylinders available: 1533 + 2 (reserved cylinders)Part Tag Flag Cylinders Size Blocks 0 unassigned wm 0 0 (0/0/0) 0 1 unassigned wm 0 0 (0/0/0) 0 2 backup wu 0 - 1532 2.99GB (1533/0/0) 6279168 3 unassigned wm 0 0 (0/0/0) 0 4 unassigned wm 0 0 (0/0/0) 0 5 unassigned wm 0 0 (0/0/0) 0 6 usr wm 3 - 1026 2.00GB (1024/0/0) 4194304 7 unassigned wm 0 0 (0/0/0) 0 8 boot wu 0 - 0 2.00MB (1/0/0) 4096 9 unassigned wm 0 0 (0/0/0) 0partition> qFORMAT MENU: disk - select a disk type - select (define) a disk type partition - select (define) a partition table current - describe the current disk format - format and analyze the disk fdisk - run the fdisk program repair - repair a defective sector label - write label to the disk analyze - surface analysis defect - defect list management backup - search for backup labels verify - read and display labels save - save new disk/partition definitions inquiry - show disk ID volname - set 8-character volume name ! - execute , then return quitformat> p
root@vzwc1:~# chown -R grid:asmadmin /dev/rdsk/c7t2d0s6root@vzwc1:~# chown -R grid:asmadmin /dev/rdsk/c7t3d0s6root@vzwc1:~# chown -R grid:asmadmin /dev/rdsk/c7t4d0s6root@vzwc1:~# chown -R grid:asmadmin /dev/rdsk/c7t5d0s6root@vzwc1:~# chown -R grid:asmadmin /dev/rdsk/c7t6d0s6root@vzwc1:~# chown -R grid:asmadmin /dev/rdsk/c7t7d0s6root@vzwc1:~# chown -R grid:asmadmin /dev/rdsk/c7t8d0s6root@vzwc1:~# root@vzwc1:~# chmod 600 /dev/rdsk/c7t2d0s6root@vzwc1:~# chmod 600 /dev/rdsk/c7t3d0s6root@vzwc1:~# chmod 600 /dev/rdsk/c7t4d0s6root@vzwc1:~# chmod 600 /dev/rdsk/c7t5d0s6root@vzwc1:~# chmod 600 /dev/rdsk/c7t6d0s6root@vzwc1:~# chmod 600 /dev/rdsk/c7t7d0s6root@vzwc1:~# chmod 600 /dev/rdsk/c7t8d0s6
grid@vzwc1:~/grid$ ./runcluvfy.sh stage -pre crsinst -n vzwc1,vzwc2 -fixup -verbose Performing pre-checks for cluster services setup Checking node reachability...Check: Node reachability from node "vzwc1" Destination Node Reachable? ------------------------------------ ------------------------ vzwc1 yes vzwc2 yes Result: Node reachability check passed from node "vzwc1"Checking user equivalence...Check: User equivalence for user "grid" Node Name Status ------------------------------------ ------------------------ vzwc2 passed vzwc1 passed Result: User equivalence check passed for user "grid"Checking node connectivity...Checking hosts config file... Node Name Status ------------------------------------ ------------------------ vzwc2 passed vzwc1 passed Verification of the hosts config file successfulInterface information for node "vzwc2" Name IP Address Subnet Gateway Def. Gateway HW Address MTU ------ --------------- --------------- --------------- --------------- ----------------- ------ net0 192.168.1.62 192.168.1.0 192.168.1.62 192.168.1.1 08:00:27:79:E4:F3 1500 net1 172.168.1.62 172.168.1.0 172.168.1.62 192.168.1.1 08:00:27:B1:D8:FC 1500 Interface information for node "vzwc1" Name IP Address Subnet Gateway Def. Gateway HW Address MTU ------ --------------- --------------- --------------- --------------- ----------------- ------ net0 192.168.1.61 192.168.1.0 192.168.1.61 192.168.1.1 08:00:27:3C:8D:72 1500 net1 172.168.1.61 172.168.1.0 172.168.1.61 192.168.1.1 08:00:27:16:13:40 1500 Check: Node connectivity of subnet "192.168.1.0" Source Destination Connected? ------------------------------ ------------------------------ ---------------- vzwc2[192.168.1.62] vzwc1[192.168.1.61] yes Result: Node connectivity passed for subnet "192.168.1.0" with node(s) vzwc2,vzwc1Check: TCP connectivity of subnet "192.168.1.0" Source Destination Connected? ------------------------------ ------------------------------ ---------------- vzwc1:192.168.1.61 vzwc2:192.168.1.62 passed Result: TCP connectivity check passed for subnet "192.168.1.0"Check: Node connectivity of subnet "172.168.1.0" Source Destination Connected? ------------------------------ ------------------------------ ---------------- vzwc2[172.168.1.62] vzwc1[172.168.1.61] yes Result: Node connectivity passed for subnet "172.168.1.0" with node(s) vzwc2,vzwc1Check: TCP connectivity of subnet "172.168.1.0" Source Destination Connected? ------------------------------ ------------------------------ ---------------- vzwc1:172.168.1.61 vzwc2:172.168.1.62 passed Result: TCP connectivity check passed for subnet "172.168.1.0"Interfaces found on subnet "192.168.1.0" that are likely candidates for VIP are:vzwc2 net0:192.168.1.62vzwc1 net0:192.168.1.61Interfaces found on subnet "172.168.1.0" that are likely candidates for VIP are:vzwc2 net1:172.168.1.62vzwc1 net1:172.168.1.61WARNING: Could not find a suitable set of interfaces for the private interconnectChecking subnet mask consistency...Subnet mask consistency check passed for subnet "192.168.1.0".Subnet mask consistency check passed for subnet "172.168.1.0".Subnet mask consistency check passed.Result: Node connectivity check passedChecking multicast communication...Checking subnet "192.168.1.0" for multicast communication with multicast group "230.0.1.0"...Check of subnet "192.168.1.0" for multicast communication with multicast group "230.0.1.0" passed.Checking subnet "172.168.1.0" for multicast communication with multicast group "230.0.1.0"...Check of subnet "172.168.1.0" for multicast communication with multicast group "230.0.1.0" passed.Check of multicast communication passed.Check: Total memory Node Name Available Required Status ------------ ------------------------ ------------------------ ---------- vzwc2 4GB (4194304.0KB) 2GB (2097152.0KB) passed vzwc1 4GB (4194304.0KB) 2GB (2097152.0KB) passed Result: Total memory check passedCheck: Available memory Node Name Available Required Status ------------ ------------------------ ------------------------ ---------- vzwc2 2.927GB (3069192.0KB) 50MB (51200.0KB) passed vzwc1 2.4648GB (2584568.0KB) 50MB (51200.0KB) passed Result: Available memory check passedCheck: Swap space Node Name Available Required Status ------------ ------------------------ ------------------------ ---------- vzwc2 4GB (4194300.0KB) 4GB (4194304.0KB) failed vzwc1 4GB (4194300.0KB) 4GB (4194304.0KB) failed Result: Swap space check failedCheck: Free disk space for "vzwc2:/tmp" Path Node Name Mount point Available Required Status ---------------- ------------ ------------ ------------ ------------ ------------ /tmp vzwc2 /tmp 6.453GB 1GB passed Result: Free disk space check passed for "vzwc2:/tmp"Check: Free disk space for "vzwc1:/tmp" Path Node Name Mount point Available Required Status ---------------- ------------ ------------ ------------ ------------ ------------ /tmp vzwc1 /tmp 5.9748GB 1GB passed Result: Free disk space check passed for "vzwc1:/tmp"Check: User existence for "grid" Node Name Status Comment ------------ ------------------------ ------------------------ vzwc2 passed exists(1100) vzwc1 passed exists(1100) Checking for multiple users with UID value 1100Result: Check for multiple users with UID value 1100 passed Result: User existence check passed for "grid"Check: Group existence for "oinstall" Node Name Status Comment ------------ ------------------------ ------------------------ vzwc2 passed exists vzwc1 passed exists Result: Group existence check passed for "oinstall"Check: Group existence for "dba" Node Name Status Comment ------------ ------------------------ ------------------------ vzwc2 passed exists vzwc1 passed exists Result: Group existence check passed for "dba"Check: Membership of user "grid" in group "oinstall" [as Primary] Node Name User Exists Group Exists User in Group Primary Status ---------------- ------------ ------------ ------------ ------------ ------------ vzwc2 yes yes yes yes passed vzwc1 yes yes yes yes passed Result: Membership check for user "grid" in group "oinstall" [as Primary] passedCheck: Membership of user "grid" in group "dba" Node Name User Exists Group Exists User in Group Status ---------------- ------------ ------------ ------------ ---------------- vzwc2 yes yes yes passed vzwc1 yes yes yes passed Result: Membership check for user "grid" in group "dba" passedCheck: Run level Node Name run level Required Status ------------ ------------------------ ------------------------ ---------- vzwc2 3 3 passed vzwc1 3 3 passed Result: Run level check passedCheck: Hard limits for "maximum open file descriptors" Node Name Type Available Required Status ---------------- ------------ ------------ ------------ ---------------- vzwc2 hard 65536 65536 passed vzwc1 hard 65536 65536 passed Result: Hard limits check passed for "maximum open file descriptors"Check: Soft limits for "maximum open file descriptors" Node Name Type Available Required Status ---------------- ------------ ------------ ------------ ---------------- vzwc2 soft 65536 1024 passed vzwc1 soft 65536 1024 passed Result: Soft limits check passed for "maximum open file descriptors"Check: Hard limits for "maximum user processes" Node Name Type Available Required Status ---------------- ------------ ------------ ------------ ---------------- vzwc2 hard 29995 16384 passed vzwc1 hard 29995 16384 passed Result: Hard limits check passed for "maximum user processes"Check: Soft limits for "maximum user processes" Node Name Type Available Required Status ---------------- ------------ ------------ ------------ ---------------- vzwc2 soft 29995 2047 passed vzwc1 soft 29995 2047 passed Result: Soft limits check passed for "maximum user processes"Check: System architecture Node Name Available Required Status ------------ ------------------------ ------------------------ ---------- vzwc2 64-bit amd64 kernel modules 64-bit amd64 kernel modules passed vzwc1 64-bit amd64 kernel modules 64-bit amd64 kernel modules passed Result: System architecture check passedCheck: Kernel version Node Name Available Required Status ------------ ------------------------ ------------------------ ---------- vzwc2 5.11 5.11 passed vzwc1 5.11 5.11 passed Result: Kernel version check passedCheck: Kernel parameter for "project.max-shm-memory" Node Name Current Required Status ------------ ------------------------ ------------------------ ---------- vzwc2 5368709120 2147483648 passed vzwc1 5368709120 2147483648 passed Result: Kernel parameter check passed for "project.max-shm-memory"Checking for multiple users with UID value 0Result: Check for multiple users with UID value 0 passed Check: Current group ID Result: Current group ID check passedStarting check for consistency of primary group of root user Node Name Status ------------------------------------ ------------------------ vzwc2 passed vzwc1 passed Check for consistency of root user's primary group passedStarting Clock synchronization checks using Network Time Protocol(NTP)...NTP Configuration file check started...Network Time Protocol(NTP) configuration file not found on any of the nodes. Oracle Cluster Time Synchronization Service(CTSS) can be used instead of NTP for time synchronization on the cluster nodesNo NTP Daemons or Services were found to be runningResult: Clock synchronization check using Network Time Protocol(NTP) passedChecking Core file name pattern consistency...Core file name pattern consistency check passed.Checking to make sure user "grid" is not in "root" group Node Name Status Comment ------------ ------------------------ ------------------------ vzwc2 passed does not exist vzwc1 passed does not exist Result: User "grid" is not part of "root" group. Check passedCheck default user file creation mask Node Name Available Required Comment ------------ ------------------------ ------------------------ ---------- vzwc2 0022 0022 passed vzwc1 0022 0022 passed Result: Default user file creation mask check passedChecking consistency of file "/etc/resolv.conf" across nodesChecking the file "/etc/resolv.conf" to make sure only one of domain and search entries is definedFile "/etc/resolv.conf" does not have both domain and search entries definedChecking if domain entry in file "/etc/resolv.conf" is consistent across the nodes...domain entry in file "/etc/resolv.conf" is consistent across nodesChecking if search entry in file "/etc/resolv.conf" is consistent across the nodes...search entry in file "/etc/resolv.conf" is consistent across nodesChecking DNS response time for an unreachable node Node Name Status ------------------------------------ ------------------------ vzwc2 passed vzwc1 passed The DNS response time for an unreachable node is within acceptable limit on all nodesFile "/etc/resolv.conf" is consistent across nodesCheck: Time zone consistency Result: Time zone consistency check passedPre-check for cluster services setup was unsuccessful on all the nodes.
注意: Solaris11 vc3Ryb25nPsnPsLLXsDExZ1IyIFJBQyBHSbXEyrG68iAs1NrX7rrz1rTQ0HJvb3Quc2jV4rj2vcWxvtDo0qq9+MjrR1JJRF9IT01FLMi7uvPWtNDQLi9yb290LnNoo6y38dTyu+GxqLTtPC9wPgo8cD5wd2Q6IGNhbm5vdCBhY2Nlc3MgcGFyZW50IGRpcmVjdG9yaWVzIFtQZXJtaXNzaW9uIGRlbmllZF08YnI+ClJ1biByb290LnNoIGZyb20gYSBkaXJlY3RvcnkgdGhhdCBoYXMgcmVhZC9leGVjdXRlIGFjY2VzcyB0byB0aGUgZ3JpZCBvd25lciA=”grid’
/u01/app/11.2.0/grid/perl/bin/perl -I/u01/app/11.2.0/grid/perl/lib -I/u01/app/11.2.0/grid/crs/install /u01/app/11.2.0/grid/crs/install/rootcrs.pl execution failed
详见
11.2 Grid Infrastructure root.sh Failed with “error retrieving current directory” (Doc ID 1114203.1)