C#开发实例-订制屏幕截图工具（七）添加放大镜功能的代码示例

由于截图时可能需要精确截取某一部分，所以需要放大镜的功能，这样截取的时候才更容易定位截图的位置。

添加PictureBox，name属性设置为“pictureBox_zoom”；

在“Form1_Load”事件处理函数中添加以下代码：

//设置放大镜的大小            this.pictureBox_zoom.Width = this.ZoomBoxWidth;            this.pictureBox_zoom.Height = this.ZoomBoxHeight;

在“ExitCutImage”方法中添加代码：

在“Form1_MouseUp”事件处理函数中添加代码：

在“ShowForm”方法的else条件最后添加代码：

if (this.ZoomBoxVisible)                {                    UpdateCutInfoLabel(UpdateUIMode.ShowZoomBox);                    this.pictureBox_zoom.Show();                }

在“UpdateCutInfoLabel”函数最后添加以下代码：

if (this.pictureBox_zoom.Visible || (updateUIMode & UpdateUIMode.ShowZoomBox) != UpdateUIMode.None)            {                Point zoomLocation = new Point(MousePosition.X + 15, MousePosition.Y + 22);                if (zoomLocation.Y + this.pictureBox_zoom.Height > this.Height)                {                    if (zoomLocation.X + this.pictureBox_zoom.Width > this.Width)                    {                        zoomLocation = new Point(MousePosition.X - this.pictureBox_zoom.Width - 10, MousePosition.Y - this.pictureBox_zoom.Height - 10);                    }                    else                    {                        zoomLocation = new Point(MousePosition.X + 15, MousePosition.Y - this.pictureBox_zoom.Height - 15);                    }                }                else                {                    if (zoomLocation.X + this.pictureBox_zoom.Width > this.Width)                    {                        zoomLocation = new Point(MousePosition.X - this.pictureBox_zoom.Width - 15, MousePosition.Y);                    }                }                this.pictureBox_zoom.Location = zoomLocation;                if (!this.pictureBox_zoom.Visible)                {                    this.pictureBox_zoom.Show();                }            }

在“Form1

本文来源gao!%daima.com搞$代*!码$网9

_KeyUp”事件处理函数中添加以下代码：

为“pictureBox_zoom”添加“Paint”事件处理程序，代码如下：

        /// <summary>        /// 放大镜组件重绘事件处理程序        /// 实时显示鼠标指针位置放大后的图像        /// </summary>        /// <param name="sender"></param>        /// <param name="e"></param>        private void pictureBox_zoom_Paint(object sender, PaintEventArgs e)        {            Bitmap bmp_lbl = new Bitmap(e.ClipRectangle.Width, e.ClipRectangle.Height);            int srcWidth = (int)(this.ZoomBoxWidth / 10);            int srcHeight = (int)(this.ZoomBoxHeight / 10);            Bitmap bmp = new Bitmap(srcWidth, srcHeight);            Rectangle srcRect = new Rectangle(MousePosition.X - 5, MousePosition.Y - 4, srcWidth, srcHeight);            if (!isCuting)            {                srcRect = new Rectangle(MousePosition.X - 6, MousePosition.Y - 5, srcWidth, srcHeight);            }            Graphics g = Graphics.FromImage(bmp);            g.DrawImage(screenImage, 0, 0, srcRect, GraphicsUnit.Pixel);            g.Dispose();            //Zoom            int x, y;            for (int row = 0; row < bmp.Height; row++)            {                for (int col = 0; col < bmp.Width; col++)                {                    Color pc = bmp.GetPixel(col, row);                    for (int h = 0; h < 10; h++)                    {                        for (int w = 0; w < 10; w++)                        {                            x = col * 10 + w;                            y = row * 10 + h;                            if (x < bmp_lbl.Width && y < bmp_lbl.Height)                            {                                bmp_lbl.SetPixel(x, y, pc);                            }                        }                    }                }            }            e.Graphics.DrawImage(bmp_lbl, 0, 0);            int blockX = e.ClipRectangle.Width / 2;            int blockY = e.ClipRectangle.Height / 2;            SolidBrush brush = new SolidBrush(Color.FromArgb(10, 124, 202));            Pen pen = new Pen(brush, 2.0F);            e.Graphics.DrawLine(pen, new Point(0, blockY), new Point(e.ClipRectangle.Width, blockY));            e.Graphics.DrawLine(pen, new Point(blockX, 0), new Point(blockX, e.ClipRectangle.Height));            g.Dispose();            bmp_lbl.Dispose();        }

编译，运行，截图看看效果吧！

以上就是C#开发实例-订制屏幕截图工具（七）添加放大镜功能的代码示例的详细内容，更多请关注搞代码gaodaima其它相关文章！

喜欢 (0)赏

[搞代码]

分享 (0)