• 欢迎访问搞代码网站,推荐使用最新版火狐浏览器和Chrome浏览器访问本网站!
  • 如果您觉得本站非常有看点,那么赶紧使用Ctrl+D 收藏搞代码吧

sqlserver 存储过程分页代码第1/2页_sqlserver

sqlserver 搞代码 3年前 (2018-06-17) 127次浏览 已收录 0个评论
复制代码 代码如下:
declare @TotalCount int
declare @TotalPageCount int
exec P_viewPage_A ‘type1′,’*’,’id’,”,’id asc’,1,0,4,3,@TotalCount output,@TotalPageCount output

select * from type1

http://www.gaodaima.com/?p=37490sqlserver 存储过程分页代码第1/2页_sqlserver

Create PROC P_viewPage_A
/*
nzperfect [no_mIss] 高效通用分页存储过程(双向检索) 2007.5.7 QQ:34813284
敬告:适用于单一主键或存在唯一值列的表或视图
ps:Sql语句为8000字节,调用时请注意传入参数及sql总长度不要超过指定范围
*/
@TableName VARCHAR(200), –表名
@FieldList VARCHAR(2000), –显示列名,如果是全部字段则为*
@PrimaryKey VARCHAR(100), –单一主键或唯一值键
@Where VARCHAR(2000), –查询条件 不含’where’字符,如id>10 and len(userid)>9
@Order VARCHAR(1000), –排序 不含’order by’字符,如id asc,userid desc,必须指定asc或desc
[email protected]=3时生效,记住一定要在最后加上主键,否则会让你比较郁闷
@SortType INT, –排序规则 1:正序asc 2:倒序desc 3:多列排序方法
@RecorderCount INT, –记录总数 0:会返回总记录
@PageSize INT, –每页输出的记录数
@PageIndex INT, –当前页数
@TotalCount INT OUTPUT, –记返回总记录
@TotalPageCount INT OUTPUT –返回总页数
AS
SET NOCOUNT ON
IF ISNULL(@TotalCount,”) = ” SET @TotalCount = 0
SET @Order = RTRIM(LTRIM(@Order))
SET @PrimaryKey = RTRIM(LTRIM(@PrimaryKey))
SET @FieldList = REPLACE(RTRIM(LTRIM(@FieldList)),’ ‘,”)
WHILE CHARINDEX(‘, ‘,@Order) > 0 OR CHARINDEX(‘ ,’,@Order) > 0
BEGIN
SET @Order = REPLACE(@Order,’, ‘,’,’)
SET @Order = REPLACE(@Order,’ ,’,’,’)
END
IF ISNULL(@TableName,”) = ” OR ISNULL(@FieldList,”) = ”
OR ISNULL(@PrimaryKey,”) = ”
OR @SortType < 1 OR @SortType >3
OR @RecorderCount < 0 OR @PageSize < 0 OR @PageIndex < 0
BEGIN
PRINT(‘ERR_00’)
RETURN
END
IF @SortType = 3
BEGIN
IF (UPPER(RIGHT(@Order,4))!=’ ASC’ AND UPPER(RIGHT(@Order,5))!=’ DESC’)
BEGIN PRINT(‘ERR_02’) RETURN END
END
DECLARE @new_where1 VARCHAR(1000)
DECLARE @new_where2 VARCHAR(1000)
DECLARE @new_order1 VARCHAR(1000)
DECLARE @new_order2 VARCHAR(1000)
DECLARE @new_order3 VARCHAR(1000)
DECLARE @Sql VARCHAR(8000)
DECLARE @SqlCount NVARCHAR(4000)
IF ISNULL(@where,”) = ”
BEGIN
SET @new_where1 = ‘ ‘
SET @new_where2 = ‘ WHERE ‘
END
ELSE
BEGIN
SET @new_where1 = ‘ WHERE ‘ + @where
SET @new_where2 = ‘ WHERE ‘ + @where + ‘ AND ‘
END
IF ISNULL(@order,”) = ” OR @SortType = 1 OR @SortType = 2
BEGIN
IF @SortType = 1
BEGIN
SET @new_order1 = ‘ ORDER BY ‘ + @PrimaryKey + ‘ ASC’
SET @new_order2 = ‘ ORDER BY ‘ + @PrimaryKey + ‘ DESC’
END
IF @SortType = 2
BEGIN
SET @new_order1 = ‘ ORDER BY ‘ + @PrimaryKey + ‘ DESC’
SET @new_order2 = ‘ ORDER BY ‘ + @PrimaryKey + ‘ ASC’
END
END
ELSE
BEGIN
SET @new_order1 = ‘ ORDER BY ‘ + @Order
END
IF @SortType = 3 AND CHARINDEX(‘,’[email protected]+’ ‘,’,’[email protected])>0
BEGIN
SET @new_order1 = ‘ ORDER BY ‘ + @Order
SET @new_order2 = @Order + ‘,’
SET @new_order2 = REPLACE(REPLACE(@new_order2,’ASC,’,'{ASC},’),’DESC,’,'{DESC},’)
SET @new_order2 = REPLACE(REPLACE(@new_order2,'{ASC},’,’DESC,’),'{DESC},’,’ASC,’)
SET @new_order2 = ‘ ORDER BY ‘ + SUBSTRING(@new_order2,1,LEN(@new_order2)-1)
IF @FieldList <> ‘*’
BEGIN
SET @new_order3 = REPLACE(REPLACE(@Order + ‘,’,’ASC,’,’,’),’DESC,’,’,’)
SET @FieldList = ‘,’ + @FieldList
WHILE CHARINDEX(‘,’,@new_order3)>0
BEGIN
IF CHARINDEX(SUBSTRING(‘,’[email protected]_order3,1,CHARINDEX(‘,’,@new_order3)),’,’[email protected]+’,’)>0
BEGIN
SET @FieldList =
@FieldList + ‘,’ + SUBSTRING(@new_order3,1,CHARINDEX(‘,’,@new_order3))
END
SET @new_order3 =
SUBSTRING(@new_order3,CHARINDEX(‘,’,@new_order3)+1,LEN(@new_order3))
END
SET @FieldList = SUBSTRING(@FieldList,2,LEN(@FieldList))
END
END
SET @SqlCount = ‘SELECT @TotalCount=COUNT(*),@TotalPageCount=CEILING((COUNT(*)+0.0)/’
+ CAST(@PageSize AS VARCHAR)+’) FROM ‘ + @TableName + @new_where1
IF @RecorderCount = 0
BEGIN
EXEC SP_EXECUTESQL @SqlCount,N’@TotalCount INT OUTPUT,@TotalPageCount INT OUTPUT’,
@TotalCount OUTPUT,@TotalPageCount OUTPUT
END
ELSE
BEGIN
SELECT @TotalCount = @RecorderCount
END
IF @PageIndex > CEILING((@TotalCount+0.0)[email protected])
BEGIN
SET @PageIndex = CEILING((@TotalCount+0.0)[email protected])
END
IF @PageIndex = 1 OR @PageIndex >= CEILING((@TotalCount+0.0)[email protected])
BEGIN
IF @PageIndex = 1 –返回第一页数据
BEGIN
SET @Sql = ‘SELECT TOP ‘ + STR(@PageSize) + ‘ ‘ + @FieldList + ‘ FROM ‘
+ @TableName + @new_where1 + @new_order1
END
IF @PageIndex >= CEILING((@TotalCount+0.0)[email protected]) –返回最后一页数据
BEGIN
SET @Sql = ‘SELECT TOP ‘ + STR(@PageSize) + ‘ ‘ + @FieldList + ‘ FROM (‘
+ ‘SELECT TOP ‘ + STR(ABS(@PageSize*@PageIndex-@[email protected]))
+ ‘ ‘ + @FieldList + ‘ FROM ‘
+ @TableName + @new_where1 + @new_order2 + ‘ ) AS TMP ‘
+ @new_order1
END
END
ELSE
BEGIN
IF @SortType = 1 –仅主键正序排序
BEGIN
IF @PageIndex <= CEILING((@TotalCount+0.0)[email protected])/2 –正向检索
BEGIN
SET @Sql = ‘SELECT TOP ‘ + STR(@PageSize) + ‘ ‘ + @FieldList + ‘ FROM ‘
+ @TableName + @new_where2 + @PrimaryKey + ‘ > ‘
+ ‘(SELECT MAX(‘ + @PrimaryKey + ‘) FROM (SELECT TOP ‘
+ STR(@PageSize*(@PageIndex-1)) + ‘ ‘ + @PrimaryKey
+ ‘ FROM ‘ + @TableName
+ @new_where1 + @new_order1 +’ ) AS TMP) ‘+ @new_order1
END
ELSE –反向检索
BEGIN
SET @Sql = ‘SELECT TOP ‘ + STR(@PageSize) + ‘ ‘ + @FieldList + ‘ FROM (‘
+ ‘SELECT TOP ‘ + STR(@PageSize) + ‘ ‘
+ @FieldList + ‘ FROM ‘
+ @TableName + @new_where2 + @PrimaryKey + ‘ < ‘
+ ‘(SELECT MIN(‘ + @PrimaryKey + ‘) FROM (SELECT TOP ‘
+ STR(@[email protected][email protected]) + ‘ ‘ + @PrimaryKey
+ ‘ FROM ‘ + @TableName
+ @new_where1 + @new_order2 +’ ) AS TMP) ‘+ @new_order2
+ ‘ ) AS TMP ‘ + @new_order1
END
END
IF @SortType = 2 –仅主键反序排序
BEGIN
IF @PageIndex <= CEILING((@TotalCount+0.0)[email protected])/2 –正向检索
BEGIN
SET @Sql = ‘SELECT TOP ‘ + STR(@PageSize) + ‘ ‘ + @FieldList + ‘ FROM ‘
+ @TableName + @new_where2 + @PrimaryKey + ‘ < ‘
+ ‘(SELECT MIN(‘ + @PrimaryKey + ‘) FROM (SELECT TOP ‘
+ STR(@PageSize*(@PageIndex-1)) + ‘ ‘ + @PrimaryKey
+’ FROM ‘+ @TableName
+ @new_where1 + @new_order1 + ‘) AS TMP) ‘+ @new_order1
END
ELSE –反向检索
BEGIN
SET @Sql = ‘SELECT TOP ‘ + STR(@PageSize) + ‘ ‘ + @FieldList + ‘ FROM (‘
+ ‘SELECT TOP ‘ + STR(@PageSize) + ‘ ‘
+ @FieldList + ‘ FROM ‘
+ @TableName + @new_where2 + @PrimaryKey + ‘ > ‘
+ ‘(SELECT MAX(‘ + @PrimaryKey + ‘) FROM (SELECT TOP ‘
+ STR(@[email protected][email protected]) + ‘ ‘ + @PrimaryKey
+ ‘ FROM ‘ + @TableName
+ @new_where1 + @new_order2 +’ ) AS TMP) ‘+ @new_order2
+ ‘ ) AS TMP ‘ + @new_order1
END
END
IF @SortType = 3 –多列排序,必须包含主键,且放置最后,否则不处理
BEGIN
IF CHARINDEX(‘,’ + @PrimaryKey + ‘ ‘,’,’ + @Order) = 0
BEGIN PRINT(‘ERR_02’) RETURN END
IF @PageIndex <= CEILING((@TotalCount+0.0)[email protected])/2 –正向检索
BEGIN
SET @Sql = ‘SELECT TOP ‘ + STR(@PageSize) + ‘ ‘ + @FieldList + ‘ FROM ( ‘
+ ‘SELECT TOP ‘ + STR(@PageSize) + ‘ ‘ + @FieldList + ‘ FROM ( ‘
+ ‘ SELECT TOP ‘ + STR(@[email protected]) + ‘ ‘ + @FieldList
+ ‘ FROM ‘ + @TableName + @new_where1 + @new_order1 + ‘ ) AS TMP ‘
+ @new_order2 + ‘ ) AS TMP ‘ + @new_order1
END
ELSE –反向检索
BEGIN
SET @Sql = ‘SELECT TOP ‘ + STR(@PageSize) + ‘ ‘ + @FieldList + ‘ FROM ( ‘
+ ‘SELECT TOP ‘ + STR(@PageSize) + ‘ ‘ + @FieldList + ‘ FROM ( ‘
+ ‘ SELECT TOP ‘ + STR(@[email protected] [email protected][email protected]) + ‘ ‘ + @FieldList
+ ‘ FROM ‘ + @TableName + @new_where1 + @new_order2 + ‘ ) AS TMP ‘
+ @new_order1 + ‘ ) AS TMP ‘ + @new_order1
END
END
END
EXEC(@Sql)
GO

如何用vc#调用上面的存储过程

欢迎大家阅读《sqlserver 存储过程分页代码第1/2页_sqlserver》,跪求各位点评,若觉得好的话请收藏本文,by 搞代码


喜欢 (0)
[搞代码]
分享 (0)
发表我的评论
取消评论

表情 贴图 加粗 删除线 居中 斜体 签到

Hi,您需要填写昵称和邮箱!

  • 昵称 (必填)
  • 邮箱 (必填)
  • 网址